Before you start
Put your iPhone, iPad, Mac, or Apple TV on the same local network as the camera or NVR. You need the local IP address, username, password, and NVR channel number if applicable.
RTSP URL format
Some CP Plus models expose RTSP directly, while others are easier through ONVIF discovery or NVR channel setup.
CP Plus setup is model-dependent, so confirm the exact RTSP or ONVIF details in the model manual.
ONVIF setup
If the model supports ONVIF, use SmartRTSP ONVIF scan first. Some models may use a separate ONVIF port, so confirm the value in the camera or NVR interface.
For live video, check ONVIF Profile S first. For newer features such as H.265, confirm Profile T or equivalent support on both camera and client.
Troubleshooting
If video does not open, check IP address, credentials, RTSP port, ONVIF service, subnet, and codec. Use sub stream for weak networks or multi-camera grids.
Safe access
Do not expose RTSP or ONVIF ports directly to the public internet. Use VPN such as Tailscale or WireGuard for remote viewing.
FAQ
What is the RTSP URL for CP Plus?
It depends on model and firmware. Use the format in this guide as a starting point and verify the port in the camera UI or manual.
Does CP Plus support ONVIF?
Many models do, but support varies. Enable ONVIF where required and use SmartRTSP ONVIF scan first.
Can I view it on iPhone?
Yes. If the camera or NVR exposes RTSP or ONVIF on the local network, you can add it to SmartRTSP.
Related setup guides
Along with this brand guide, these RTSP URL, ONVIF, and IP camera setup pages help complete the SmartRTSP setup.