Before you start
Put your iPhone, iPad, Mac, or Apple TV on the same local network as the camera or NVR. You need the local IP address, username, password, and NVR channel number if applicable.
RTSP URL format
Channel 1 main stream: /Streaming/Channels/101. Channel 1 sub stream: /Streaming/Channels/102. Channel 2 main stream: /Streaming/Channels/201.
The RTSP port can be changed by the device administrator. Some Hikvision support examples use 10554 for authenticated access, so verify the port on the camera or NVR.
ONVIF setup
Enable ONVIF under Configuration > Network > Advanced Settings > Integration Protocol, then use an ONVIF user/account where the firmware requires it.
For live video, check ONVIF Profile S first. For newer features such as H.265, confirm Profile T or equivalent support on both camera and client.
Troubleshooting
If video does not open, check IP address, credentials, RTSP port, ONVIF service, subnet, and codec. Use sub stream for weak networks or multi-camera grids.
Safe access
Do not expose RTSP or ONVIF ports directly to the public internet. Use VPN such as Tailscale or WireGuard for remote viewing.
FAQ
What is the RTSP URL for Hikvision?
It depends on model and firmware. Use the format in this guide as a starting point and verify the port in the camera UI or manual.
Does Hikvision support ONVIF?
Many models do, but support varies. Enable ONVIF where required and use SmartRTSP ONVIF scan first.
Can I view it on iPhone?
Yes. If the camera or NVR exposes RTSP or ONVIF on the local network, you can add it to SmartRTSP.
Related setup guides
Along with this brand guide, these RTSP URL, ONVIF, and IP camera setup pages help complete the SmartRTSP setup.