Bosch Camera RTSP Stream URL & Setup Guide

Published May 1, 2026 | Updated May 8, 2026

Bosch cameras are enterprise-grade security systems with excellent RTSP and ONVIF support. This guide covers RTSP stream URLs, default IP addresses, stream profile configuration, and integration with SmartRTSP.

Default IP Address for Bosch Cameras

Bosch IP cameras do not have a fixed factory default IP. Instead, they use DHCP by default to obtain an IP address automatically from your router. If no DHCP server is available, they fall back to the link-local address range:

169.254.x.x (link-local, auto-assigned)

To find your Bosch camera's IP address:

Use the Bosch IP Helper tool (free download from boschsecurity.com)
Check your router's DHCP client list
Use SmartRTSP's built-in ONVIF scanner — tap Scan to auto-discover all Bosch cameras on your network
Use a network scanner like Fing or Angry IP Scanner

Default credentials: Most Bosch cameras ship with username service and no password, or admin / admin. You are prompted to set a password on first login.

Popular Bosch Camera Models

Bosch FLEXIDOME IP starlight 8000i (NDE-8502-R)
Bosch DINION IP starlight 8000i (NBE-8502-R)
Bosch Autodome IP starlight 7000i (VG5-7130-EPC4)
Bosch FLEXIDOME IP micro 5100i (NDE-5502-AL)
Bosch MIC IP Fusion 9000i (MIC-9502-Z30GQS)
Bosch TINYON IP 2000 WI (NCE-2703-F02-WH)

Bosch Camera RTSP Stream URLs

Bosch cameras support multiple RTSP URL formats depending on model generation:

Standard RTSP URL (most models)

rtsp://username:password@camera-ip:554/media/media.amp

Alternative URL format (some models)

rtsp://username:password@camera-ip:554/video?inst=1&h26x=4

Channel-specific URL

rtsp://username:password@camera-ip:554/media/media.amp?channel=1

Sub-stream (lower resolution)

rtsp://username:password@camera-ip:554/media/media.amp?channel=2

Replace username, password, and camera-ip with your camera's actual credentials and IP address.

Stream Profile Configuration

Bosch cameras allow you to configure multiple stream profiles with different quality settings. To configure stream profiles:

Access camera web interface at http://camera-ip
Navigate to: Configuration → Camera → Streams
Set codec to H.264 or H.265 for best compatibility
Configure resolution: 1920×1080 (main), 640×360 (sub)
Set frame rate (recommended: 15–25 fps for live monitoring)
Set bitrate mode: CBR (constant) for stable streaming, VBR for quality

Quick Setup Steps

Find your camera IP using Bosch IP Helper or ONVIF scanner
Access camera web interface at http://camera-ip
Navigate to: Configuration → Network → Streaming → RTSP
Enable RTSP and confirm port is 554
Set username and password if not already configured
Open SmartRTSP → tap + → enter the RTSP URL → connect

Pro tip: Bosch cameras have full ONVIF compliance. In SmartRTSP, tap Scan to auto-discover your Bosch camera — no manual URL entry needed.

Troubleshooting Bosch RTSP Connections

Cannot find camera IP: Use Bosch IP Helper tool or SmartRTSP ONVIF scan. Ensure camera is on same network subnet.
No RTSP available: Ensure camera firmware supports RTSP. Update firmware via camera web interface under Maintenance → Firmware.
Connection refused on port 554: Check firewall rules. The RTSP port (554) must be accessible on your LAN.
Authentication failed: Try default credentials: service/no-password or admin/admin. Reset via camera reset button if needed.
Black screen / no video: Set stream codec to H.264 in camera Configuration → Camera → Streams. H.265 may not decode on older devices.

Ready to connect? Use SmartRTSP to add your Bosch camera — use ONVIF auto-discovery or enter the RTSP URL manually.

Download SmartRTSP