RTSP Setup Guide

Annke RTSP Setup

View your Annke IP camera on SmartRTSP. Annke cameras use a Hikvision-compatible RTSP protocol, making them easy to integrate with SmartRTSP's ONVIF scanner.

RTSP Stream URL
rtsp://<user>:<pass>@<IP>:554/Streaming/Channels/101
Port
554
Protocol
RTSP
ONVIF
Yes
Codec
H.264/H.265

Annke RTSP URL Reference

Annke cameras use Hikvision-compatible ISAPI. The URL scheme is identical to Hikvision:

StreamRTSP URL
Channel 1 — Main/Streaming/Channels/101
Channel 1 — Sub/Streaming/Channels/102
Channel 2 — Main/Streaming/Channels/201
Channel 2 — Sub/Streaming/Channels/202

Full URL prefix: rtsp://username:password@<IP>:554

How to Connect Annke to SmartRTSP

1

Enable RTSP in web UI

Log in to the camera at http://<camera-IP>. Go to Configuration → Network → Advanced Settings → Integration Protocol. Enable RTSP on port 554. Save changes.

2

Use ONVIF scan or manual URL

ONVIF Scan (recommended): SmartRTSP's ONVIF scanner discovers Annke cameras instantly.

Manual:

rtsp://admin:Password@192.168.1.100:554/Streaming/Channels/101

FAQ

Is Annke compatible with Hikvision software?
Yes. Annke cameras use Hikvision-compatible ISAPI and ONVIF protocols. The RTSP URL format is identical. SmartRTSP works with Annke cameras the same way it works with Hikvision.
Where is the official Annke support site?
Visit annke.com/pages/download for manuals and firmware downloads.