Separate model evidence from brand assumptions
The DCS-7513 B1 specification lists H.264 and MJPEG video, RTSP-related network protocols, HTTP and RTSP authentication, and ONVIF compliance. Older products such as the DCS-5230 document a different set of formats and capabilities. Those two datasheets demonstrate why a single recipe cannot cover the whole catalogue.
Write down the full model and hardware revision before downloading a manual or firmware. A similar-looking product can use a different interface or stream layout. Cloud application access, a memory-card slot and motion notifications are not evidence that third-party local streaming is enabled.
Verify a supported local streaming route
- Find the model and hardware revision on the camera label, then select the matching official manual and datasheet.
- Check for an explicit RTSP or ONVIF entry. If the documentation does not confirm either service, ask D-Link about that exact revision before trying an invented path.
- Put the camera and SmartRTSP device on a network where they can communicate. Locate the camera’s local address and sign in through its documented management interface.
- Inspect the enabled video profiles, local viewing credentials, authentication settings and configured RTSP port. Obtain the actual stream URI from the interface, ONVIF response or model documentation.
- Add the confirmed URI in SmartRTSP, verify a moving picture, then separately test the additional audio or control functions you need.
Use the URI for this model, not a guessed D-Link path
The cited datasheets establish protocol and video-format capabilities but do not provide a universal RTSP path. This guide therefore does not manufacture a brand-wide URL. If ONVIF is supported and enabled, the appropriate media profile can supply a URI; otherwise use the path documented for the exact device.
Choose an already enabled stream before changing encoder settings. Reducing resolution or bitrate can help a local camera grid, but a change may also affect an existing recorder. Check which video compression the selected profile sends rather than assuming it matches the main stream.
Distinguish account problems from unavailable services
| Problem | Useful next action |
|---|---|
| mydlink login works but RTSP does not | Check local camera streaming credentials and whether that hardware revision offers RTSP. |
| ONVIF discovery finds nothing | Check model support, enablement and network reachability; do not infer that every D-Link camera is discoverable. |
| Live video starts but is unstable | Inspect the selected compression, frame rate and local bandwidth before changing unrelated controls. |
Check each feature independently
Start on the same local network with the exact model, firmware and account permissions. A working video stream does not prove support for ONVIF discovery, pan or tilt, two-way audio, events, or every recording feature. Test the features you need in your installed SmartRTSP app.
Keep camera credentials private. Do not expose camera ports to the public internet just to test local viewing. Manufacturer cloud accounts, device accounts and generated sharing links are not interchangeable.
Frequently Asked Questions
Does every mydlink camera support RTSP?
No brand-wide conclusion is justified. Verify the exact model, revision and firmware against its documentation.
Why is there no ready-made RTSP address here?
The cited specifications do not establish one universal path. Use the actual URI provided for your device rather than a plausible-looking address.
What has been verified?
Official documentation was checked on 2026-10-18. This is not a physical-device test or a guarantee of every ONVIF or PTZ feature.
Official sources and scope
Read the documentation for the exact model before changing settings. Manufacturer menus, firmware and service availability can change. These sources explain the published connection conditions, not independently verified SmartRTSP hardware compatibility.