Camera compatibility guide

i-PRO Camera RTSP Setup

i-PRO publishes command-interface and ONVIF application notes for its network cameras. Those documents distinguish numbered video streams, multi-sensor channels and ONVIF profile URIs. Start with the exact model and encoding settings rather than treating every sensor as an ordinary single-lens stream.

Select the stream and sensor explicitly

A documented native stream path and an ONVIF-generated URI are different ways to identify a media resource. Match the camera model, stream number, sensor and local credentials before connecting.

Documentation checked: 2026-10-18. This guide is not a physical-camera test or model certification.

Read the stream number and sensor together

The command-interface document lists stream_1 through stream_4 for supported H.264/H.265 models. Multi-sensor devices and applicable fisheye configurations add a channel selection. The sensor number and encoder number identify different things; changing one does not necessarily select the other.

The official fisheye article describes switching a suitable camera to Quad Streams before requesting the four individual views. Do not assume that a channel-specific address will work while the camera remains in a different image-capture mode. Existing recording software may also depend on that mode.

Set up a documented i-PRO stream

  1. Identify the full model, installed firmware and current image-capture mode. Use the matching i-PRO manual; older Panasonic security-camera documents should be checked for applicability.
  2. Initialize the camera as directed and use the local account established for this installation. Do not rely on historic default-password examples.
  3. Open the stream settings and select an enabled encoder with the resolution, frame rate and H.264/H.265 format you intend to view.
  4. For a single-lens native stream, use the documented stream resource. For multi-sensor or Quad Streams operation, include the channel specified by the applicable guide.
  5. Add the confirmed address in SmartRTSP on a reachable local network. Verify the actual sensor image, then check reconnection and any additional audio or control requirement.
rtsp://<camera-ip>/Src/MediaInput/stream_1

Use ONVIF profile information when appropriate

i-PRO’s ONVIF notes explain requesting a stream URI for a selected media profile. A URI obtained that way should be preserved rather than rewritten into the native command-interface example. It can carry profile information that selects the intended encoder.

Successful RTSP video does not establish that an analytics metadata stream, event subscription or camera control is available in the viewer. Those are distinct capabilities. Check each required function with the particular camera and the installed SmartRTSP version.

Resolve image-selection and playback faults separately

If the picture is from the wrong sensor, first check the capture mode and channel selection. If the correct sensor has no picture, inspect the encoder format and enabled stream. For unauthorized responses, inspect the local user and permissions before changing image settings.

Keep a record of the working URI and camera configuration. After a firmware update or image-capture change, repeat a short local playback test before relying on the stream in a daily monitoring layout.

Check each feature independently

Start on the same local network with the exact model, firmware and account permissions. A working video stream does not prove support for ONVIF discovery, pan or tilt, two-way audio, events, or every recording feature. Test the features you need in your installed SmartRTSP app.

Keep camera credentials private. Do not expose camera ports to the public internet just to test local viewing. Manufacturer cloud accounts, device accounts and generated sharing links are not interchangeable.

Frequently Asked Questions

Is Panasonic a second brand page for the same security-camera history?

This guide keeps the historical Panasonic security-camera documentation with i-PRO where it applies. Match the actual model rather than assuming every Panasonic video product uses this interface.

Does stream_2 mean sensor two?

Not generally. It is an encoder or stream selection; multi-sensor channel selection is a separate part of the documented resource.

Does an ONVIF application note certify all optional features?

No. Documentation was checked on 2026-10-18; model support, firmware behavior and physical-camera operation remain separate checks.

Official sources and scope

Read the documentation for the exact model before changing settings. Manufacturer menus, firmware and service availability can change. These sources explain the published connection conditions, not independently verified SmartRTSP hardware compatibility.