India setup guide

CP Plus IP Camera Setup with RTSP and ONVIF

CP Plus is a common security camera brand in India, and many users search for the camera IP address, default IP, NVR channel setup, RTSP and ONVIF compatibility. This guide keeps the setup model-safe: check your exact manual first, then add the camera or NVR channel to SmartRTSP.

Key points

  • CP Plus support varies by model, so confirm RTSP or ONVIF in the official manual for your camera, NVR or DVR.
  • You need the local IP address, username, password and either an ONVIF profile or RTSP stream URL.
  • Avoid exposing camera ports to the public internet; use a VPN for remote viewing.

Step 1: Find the CP Plus camera IP address

Connect the camera or NVR to the same router as your iPhone. Open your router's DHCP client list and look for the camera, NVR, or CP Plus device. If the address may change, create a DHCP reservation.

If you are using a CP Plus NVR, the NVR has its own IP address and each camera usually appears as a channel behind that NVR. Add channels separately in SmartRTSP when you want multi-camera viewing.

Step 2: Check RTSP and ONVIF support

Open the model-specific CP Plus manual and look for RTSP, ONVIF, Network Camera, NVR, channel or streaming settings. Do not assume every model uses the same URL format.

If ONVIF is available, create or enable the ONVIF user and run SmartRTSP's ONVIF scan. If ONVIF is not available or discovery fails, use a direct RTSP URL from the manual.

Step 3: Add the camera to SmartRTSP

Use ONVIF scan first. If the device appears, save it and test live video. If not, add a manual RTSP stream with the local IP address, port, username and password.

For NVR or DVR channel viewing, add each channel as a separate camera. Use a lower-resolution substream for stable viewing on mobile data, weak Wi-Fi or multi-camera grids.

Security checklist

Change the default password, keep firmware updated, use a strong Wi-Fi password, and do not forward RTSP or ONVIF ports directly to the internet.

For remote access, use Tailscale, WireGuard or another VPN. This keeps the camera on a private network while still letting your iPhone reach it from outside.

FAQ

What is the default IP for a CP Plus camera?

It depends on the model and network mode. The safest method is to check the router DHCP list or the model manual rather than assuming a universal default IP.

Does CP Plus support ONVIF?

Many CP Plus IP camera and NVR models support ONVIF, but support varies by model. Check the official CP Plus manual for your exact device.

Can I view CP Plus cameras on iPhone?

Yes, if your CP Plus camera or NVR exposes RTSP or ONVIF on the local network, you can add it to SmartRTSP.