Check the exact Eufy model first
RTSP/NAS support varies by model and firmware. Some Indoor Cam and eufyCam/HomeBase systems expose event-only or continuous streams; other models do not. Check the Eufy app and official support page for your exact model.
How to Enable RTSP on Eufy Camera
1
Open Eufy Security app
Open the Eufy Security app on your phone and select the exact camera you want to configure.
2
Enable RTSP stream
Open Camera Settings → Storage → NAS (RTSP Stream). Enable it, choose event or continuous mode if offered, and copy the generated RTSP URL.
3
Add to SmartRTSP
In SmartRTSP, tap + → Manual. Paste the RTSP URL from the Eufy app and tap Connect. Make sure your iPhone/Mac is on the same Wi-Fi network as the camera.
rtsp://admin:password@192.168.1.100/live0
Eufy RTSP URL Reference
| Stream | RTSP URL |
|---|---|
| App-generated stream | Copy the URL shown under NAS (RTSP Stream) |
| Common legacy example | rtsp://user:pass@IP/live0 |
Always use the URL shown in the Eufy app as it may vary by model and firmware version.
FAQ
My Eufy camera doesn't show RTSP option in the app?
NAS/RTSP support is model- and firmware-specific. Update the Eufy Security app and device firmware, then check Camera Settings → Storage for NAS (RTSP Stream). Some battery systems expose an event-only stream through HomeBase rather than a continuous stream.
Where is the official Eufy RTSP documentation?
Use Eufy's official Device NAS / RTSP Configuration Guide and model-specific support pages. The app-generated URL is authoritative for your device.